akrilik zemin img 2

Acrylic Ground Tennis Court

Acrylic Ground Tennis Court is constructed as 36 meters in length and 18 meters in total and 668 square meters open or closed according to the standards determined by International Tennis Federation (ITF). Acrylic floor tennis courts can be built in any size required for amateur use outside of international dimensions.

Soil Applications Used in Acrylic Tennis Court Construction:

Acrylic Ground Tennis Court
Cushion Acrylic Floor Tennis court

Reform Sports, which specializes in the construction of Acrylic Floor Tennis Courts, performs turnkey construction of acrylic floor tennis courts in as short as 3-4 weeks.

Acrylic Floor Tennis Courts Construction

Acrylic Ground Tennis Courts are being built according to the standards set by the International Tennis Federation (ITF). Smaller tennis courts can also be built upon request. Infrastructure, iron works, wire mesh, lighting, on-site cast acrylic flooring and tennis net installation, turnkey tennis courts are made.

Two different types of ground are used in the construction of acrylic tennis courts:

Acrylic Floor
Cushion Acrylic Floor

The construction steps are similar in both soil types. Cushion Acrylic Floor systems have an additional layer called “cushion . Cushion is a type of flooring specially designed for sports flooring with acrylic resin and various synthetic ingredients.

akrilik zemin img 1

Acrylic Ground Tennis Court

akrilik zemin img 1

Construction Steps

Excavation: After the selection of the court site, leveling operations are performed. The foundation is then laid for the perimeter beams that surround the court.
Perimeter Beam Concrete: A wicker frame is installed with 8 and 12 Q iron bars for the beams that will provide the fence floor support.
Anchoring: 3” anchor pipes are placed in the iron frame at regular intervals to connect the main posts of the fences that will surround the court .
Beam Concreting: Beam concrete is left to dry.
Field Filling: For the homogeneous settlement of the acrylic floor on the ground, the court is covered with crushed stone and plentmix filling up to 15 cm.
Asphalting: The first layer of asphalt is poured on the filling with a thickness of at least 5 cm. Finally, a thin granulated asphalt layer, specially produced for sports fields with a thickness of 5 cm, is laid and once again a roller is passed over to ensure that all layers are compacted.

Vertical pole pipes are connected to welded anchor pipes. On top of these pipes, upper, middle and horizontal pipes are attached as support pipes. Then reinforcement is applied to these pipes.

Vertical poles with stairs are erected on long sides to meet the lighting needs of the court. Lighting system work is completed by placing 400 W capacity Metal Halide projectors on these poles and installing the appropriate electrical wiring.
1 hinged door is made for entry and exit to the court. According to the standards, one net of each other is sewn at the appropriate points of the court. Then, after the acrylic coating work, these nets are stretched to the tennis net.
The poles around the court are stretched 4 × 4 cm mesh, dipped galvanized and PVC coated wire mesh and the entire court is covered with fence. These fences are reinforced with steel ropes which are connected to the poles by means of terminals.

The asphalt floor, which was previously poured into the ground and thoroughly crushed by cylinders, is cleaned thoroughly by using compressed air and water. After cleaning, filler material (Acrylic Resurfacer) is applied as the first coat.
On top of that, if Cushion Acrylic System is requested, Cushion layer is laid in 2 layers. On top of this cushion layer (if no Cushion Acrylic System is requested, directly on acrylic coating), acrylic color layers (Acrylic Procoat) are applied in 2 layers and the flooring of the tennis court is completed.
After finishing the line, the court is ready to use.

TENNIS COURT TECHNICAL SPECIFICATIONS

TENNIS CORDS PRODUCTION

PRODUCTS

You can examine our products which can be used in Acrylic Ground Tennis Court Construction.

Disk Atma Metal Cemberi slider img

Disc Throwing Metal Circle Ø 250

sirik dayama kazani ve kapagi slider img

Pole Vault Box and Cover

Salon Gulle Atma Kafesi slider img 2

Salon Gulle Atma Kafesi slider img 1

Indoor Track Shot Put Cage

Uzun ve Uc Adim Atlama – Basma Tahtasi slider

Long and Triple Jump – Push Board

havuz engeli slider image

Pool Barrier

ahsap seyyar engel slider image

Wooden Mobile Obstacle 4 Mt – 5 Mt

engel tasima arabasi

Obstacle Handling Trolley

kosu engeli

Jump Racing Barrier 1.2 Mt

gulle atma slider img

Shot Put Stop Board

sirikla yukseka atlama

Pole Vault Crossbar Ø 450

Tennis Court Construction Cost

Cost of Tennis Court Construction; Whether the site is open or closed, the type of ground to be used, the size and location of the site will vary. To get a price according to your project, you can get an offer from us by specifying the details.

REQUEST AN OFFER

Menu